Extruder |
|
|
 |
|
EXTRUSIOMETER L-Series
Göttfert Laboratory Extruders are not only just Melt Feeder, but also self-sufficient measuring equipment - therefore Extrusiometer!
|
| |
|
|
 |
|
EXTRUSIOMETER P-Series
Göttfert Laboratory Extruders are not only just Melt Feeder, but also self-sufficient measuring equipment - therefore Extrusiometer!
|
| |
|
|
 |
|
EXTRUSIOMETER MP-Series
Göttfert Laboratory Extruders are not only just Melt Feeder, but also self-sufficient measuring equipment - therefore Extrusiometer!
|
| |
|
|
 |
|
Blown Film Unit 300
The Blown Film Unit 300 is a compact unit for blowing, cooling, take off and wind up of extruded hoses. It is suitable for production of small films used by the food industry and in the packaging field where the application of big production machines is often not profitable.
|
| |
|
|
 |
|
Flat Film Unit 300
The Flat Film Unit is a compact unit combines the take-off, cooling and winding of flat films made of PE, PP and other plastics. It also serves to produce small films with variable thicknesses used in the packaging industry in general, and in the food industry specifically, where large film production units are not efficient.
|
| |
|
|
 |
|
AT-LINE RHEOMETER ALR-R,M,S
The At-Line rheometer ALR allows continuous rheological measurement of powder, flake and granular polymer for monitoring of polymerisation process. For this purpose the rheometer is directly installed on a small extruder acting as melt feeder. The measuring head receives the melt based upon either constant pressure or screw speed. Measuring criteria are MFR/MVR with single or multi-point measurements and the FFR, the ratio of two MFR values. Viscosity functions can be measured as well.
|
|
|
