RHEOGRAPH 25 / 50 / 75 / 120

The Rheograph family with different measurement force (25 / 50 / 75 / 120) are complete new developed. Additional modular based add-ons enable an extra value for determination of further material speczific characteristics.

  • DIN 54811
  • ASTM D3835
  • DIN ISO 48
  • ASTM D5930 (TC)
  • ASTM D5099
  • ISO 11443

The new developed family of the GOETTFERT capillary Rheometer is available with different measurement forces (25, 50, 75, 120kN). With the high-end model RG 120 it is possible to reach much higher sheare rates. Besides the determination of viscosity, the Rheograph family is able to access the GOETTFERT plattform for extended material characterization with features as follows: 
• PVT (PRessure, Volume, Temperature) 
• Elongation (Haul-Off, Rheotens)
• Contifeed
• Shark-Skin
• Thermal Conductivity 
• Counter-Pressure-Champer
• Die Swell Measurement

These Add-ons contribute positively to the total value for the operator who wants to get as much information as possible about his material. The well established single, double, or tripple barrel system illustrates besides the various options of different dies key advantages of a GOETTFERT Capillary Rheometer. 

GOETTFERT developed an essential improvement in terms of the accuracy of the pressure measurement. This enables to improve the reproducibility of the measurements results by factor 10 and enables especially an extension of the measurement range in low shear rates. Due to this development GOETTFERT lifted the markt standard to a higher level. 

 

Highlights
  • Single- Twin- or Triple barrel system, 12, 15, 20 or 30 mm design
  • Speed range 0,00004 - 40 mm/sec (= 1:1.000.000)
  • Compact service-friendly construction with easy accessible components
  • Temperature control range up to 400°C (500°C optional), display resolution 0.01°C
  • Automatic pressure transducer detection and identifying („Plug / Test“)
  • adaptive signal resolution of only 0.005% from the pressure transducer range
Add-On
  • PVT (Pressure, Volume, Temperature) 
  • Elongation (Haul-Off, Rheotens)
  • Contifeed
  • Shark-Skin
  • Thermal Conductivity 
  • Counter-Pressure-Champer
  • Die Swell Measurement
Applications

pvT isobaric

This procedure is standardized in ISO 17744 for piston operated instruments. Isobaric pvT measurements are performed at constant pressure...

Details

pvT isothermal

In isothermal pvT measurement, the measurement process starts at room temperature after the material is filled at melt temperature and...

Details

Bagley Correction

The Bagley correction is needed to calculate the inlet pressure drop when round hole capillaries...

 

Details

ADD-ON, Software and more Products

Sales Service