Melt Flow Indexer

Melt Flow Index Tester are used to measure the melt flow index MFR in g/10min and the volume flow index MVR in cm³/10min of pellets, powder or fine granules. The melt indexer series can carry out measurements according to ISO 1133 and ASTM D1238, procedures B, as well as ISO 1133 and ASTM D1238 procedure C for the “Half Height / Half Diameter” standard and ASTM D1238 procedure D (optional, only available for device type mi2.2) for the FRR test (Flow Rate Ratio) and ASTM D 3364. Also the manual procedure A is possible to perform.

Sales Service